Sealing a shower basin

Sealing a shower basin

XealPro is ideally suited for sealing all kinds of joints. The lower viscosity makes it very easy to pump. It also ensures that irregular joints are perfectly filled up. We finish off the surface to perfect smoothness with TEC7 Cleaner.

Step 1: Preparation

  • Degrease the substrate with TEC7 Cleaner. This is very important for a permanent good adhesion.

  • Cut off the spout at an angle of 45°. The opening must be somewhat smaller than the joint.

DOUCHEBAK AFKITTEN_Voorbereiding

Step 2: Sealing

  • Hold the gun at an angle of 45°. So the sealant can always touch both edges.

  • Squirt out a narrow, filling joint. Wider joints are more difficult to finish off, while a narrow joint is enough for a perfect waterproofing.

DOUCHEBAK AFKITTEN_afkitten

Step 3: Finishing

  • Moisten the joint spatula with TEC7 Cleaner and smooth the joint off.

  • Remove excess XealPro from the joint spatula with the Powerwipes tissues. Each time spray some TEC7 Cleaner onto the joint spatula.

  • Remove any spilled XealPro immediately with Powerwipes tissues and/or TEC7 Cleaner.

  • Wait around 24 hours before loading the joint. 

DOUCHEBAK AFKITTEN_afwerking
howtos.back to overview

Products

Discover our heroes