Poxy Primer

SUBSTRATE STRENGTHENER / BONDING PRIMER

Improves and strengthens weak and powdery surfaces

Protects iron and steel against rust, fixes loose rust particles

Bonding primer for concrete rot repairs

Mixing ratio 1:1

Where to buy?

General information

Product description

  • 2-component epoxy primer
  • High penetration into porous substrates
  • Strengthens weak surfaces through impregnation
  • Fixes powdery surfaces
  • Neutralises rust
  • Suitable for indoor and outdoor use
     

Available packages & colors

SKU EAN Description
poxy-primer-1kg-products-be-631213000 631213000 - 5414195023167 - Poxy Primer - 1kg 631213000 5414195023167 Poxy Primer - 1kg

Application

  • Concrete rust repair: neutralises rust on rebar + bonding primer for Floor Fix / Wall Fix.
  • Fixing of powdery surfaces for painting / bonding.
  • Reinforcing weak substrates for bonding: cellular concrete, plaster, gypsum board, plasterboard, natural stone, weathered concrete, etc.
  • Bonding primer for bonding on concrete, natural stone, ...
  • Reinforcing façade bricks with suspended bonding under steel beams.
  • Protects concrete and facade bricks against the effects of salts, manure, urine, etc.

Technical information

Specifications

  • Composition: epoxy resin, hardener and solvent.
  • Colour: transparent yellow.
  • Specific weight (mixture): 1 +/- 0.1 kg/dm³.
  • Adhesion:
  • Good adhesion to most building materials such as wood, stone, natural stone, concrete, ...
  • Bond strength to metal: 2N/mm².
  • Temperature resistance: min. -30°C / max. +60°C / temporarily up to 110°C.
  • Processing time: after mixing at +20°C: 30 minutes. Higher temperatures accelerate curing and lower temperatures slow down curing.
  • Processing temperature: between +5°C and +30°C.
  • Drying time: dust dry and can be walked on after 12 hours.
  • Chemical resistance after seven days:
  • Resists water, salt water, dilute acids and bases, salts, oils, fuels, urine, fertilisers and most solvents.
  • Shelf life: minimum 12 months in closed packaging - store frost-free.
  • Safety measures: Please consult the safety data sheet.
     

Instructions

Preparation

 

  • Minimum processing temperature: +5°C.
  • Apply to a clean, completely dry surface. 
  • After mixing, processable for +/- 30 minutes at temperatures of +20°C. At high temperatures, the components can be cooled for a longer processing time.
  • Pour the hardener (Component B, plastic bottle) completely into the resin (Component A, can), or use the measuring cup provided for a 1:1 mixing ratio.
  • Mix very thoroughly until both components are completely mixed.

 
Processing

 

  • After mixing, apply immediately with a brush or roller. 
  • On highly absorbent surfaces: apply a second coat after +/- 1 hour or longer.
  • The Tec7 adhesives and sealants can be applied wet-on-wet on Poxy Primer.
  • Protect from moisture and rain for 24 hours after application.
  • Can be walked on and dust dry after +/- 12 hours at +20°C. Chemically resistant after 7 days at +20°C.
  • Clean tools with Spray & PUR Cleaner.
  • Can be painted over with most varnishes and paints. 

 
Use

 

  • Depending on the porosity of the substrate: 
    • First coat: 150–300 ml/m². 
    • Second coat: 250 ml/m².
       

You have a question?

You can always call or email us.

screenreader.go to top