Mounting skirting boards

Mounting skirting boards

PUR Pro is a professional gun foam with low post-expansion. The fast filling out of hollow spaces ensures a solid substrate on which skirting boards can be bonded with TEC7.

Step 1: Preparation

  • Remove loose particles and dust with brush and/or vacuum cleaner.

  • Moisten the substrate slightly with the plant sprayer. This will give you a better adhesion. It also shortens the curing time.

Step 2: Sealing

  • Shake the can very carefully.

  • Fit the can of PUR Pro onto the gun. See the manual for this.

  • Fill the hollow spaces not quite completely with PUR Pro. Thanks to the low post-expansion you can dose very precisely.

  • You can remove uncured PUR Pro with PUR Cleaner and Powerwipes Tissues.  

  • After around 60 minutes the foam is cured.

PLINTEN MONTEREN_opvulen

Step 3: Finishing

  • Trim the PUR Pro properly with a sharp knife.

  • Degrease the back of the skirting boards with Multiclean.

  • Apply a generous quantity of TEC7 to the back of the skirting board and mount it..

  • You can remove excess TEC7 with Powerwipes tissues.

PLINTEN MONTEREN_afwerking
howtos.back to overview

Products

Discover our heroes