Tec7 Fast – Lightning-fast assembly
The fastest and most versatile turbo adhesive on the market
In the construction, renovation and installation industries, demand for fast-curing adhesive solutions is growing exponentially. Tradespeople need shorter lead times, less mechanical support and reliable performance on a wide range of substrates.
With Tec7 Fast, the brand is responding to this trend. The new product combines properties that until now were only found in separate products, such as turbo versions that are fast but have lower initial tack, or high-tack assembly adhesives with high initial tack but which cure more slowly or are difficult to apply.
Unrivalled speed
Tec7 Fast achieves its functional strength (hand-tight) in just 15 minutes on virtually all porous materials. This is unprecedentedly fast for a hybrid polymer. Traditional turbo adhesives usually achieve this speed on only one or a few porous materials, but even then, times of under 20 to 30 minutes remain extremely rare.
Also fast on non-porous materials
Whereas many turbo products only build up sufficient strength on metal or plastic after 4 to 6 hours, Tec7 Fast achieves functional strength in just 2 to 3 hours.
This makes the product ideal for modern construction projects that frequently involve metal, plastic, composites, etc.
More than just speed
In addition to its speed, Tec7 Fast also stands out thanks to an initial bond strength of 250 kg/m², which is exceptionally high within the turbo segment. This ensures that components remain securely in place immediately, even during vertical or overhead installation.
An additional advantage of Tec7 Fast is its ease of application. Whereas heavy-duty assembly adhesives are often stiff and cannot be pressed down completely flat, Tec7 Fast is easy to handle and can be pressed down completely flat for a seamless result.
KOMO Quality Mark
Tec7 Fast bears the KOMO Quality Mark, an independent quality label confirming that the product meets the highest standards for professional construction applications. This gives tradespeople, architects and consultancy firms the added assurance that Tec7 Fast can be used in projects where compliance with standards and quality assurance are crucial.
Multi-purpose in assembly, construction and finishing
Tec7 Fast is safe to use on all materials and is therefore suitable for a wide range of applications in construction, carpentry and general maintenance:
• Floor, wall and ceiling profiles
• Metal studs on concrete (plasterboard)
• Framing on floors with underfloor heating
• Shower panels: PVC, acrylic, etc.
• Fitting pieces and skirting boards for bespoke cupboards
• Fixing cabinet bodies to walls
• Kitchen units: worktops, splashbacks, etc.
• Stair treads
• Door frames, reveals, casings, etc.
• Cable ducts
• …
Tec7 Fast is designed using the latest generation of nTec Hybrid Polymer Technology. The adhesive can be used from -10°C and remains permanently elastic, making it suitable for applications subject to harsh or variable conditions.
Related products