Tec7 Fast

STICKS EVERYTHING... SUPER FAST

Strong bond in 15 minutes*

Also bonds difficult materials: PC, Plexiglas, Bluestone, EPDM, etc.

Horizontal, hanging and vertical bonding

Hardens from -10°C

Easy to apply

General information

Product description

*Functional strength on porous materials after 15 minutes
*Functional strength on non-porous materials after 2 hours
On dry and damp surfaces
Remains elastic over the long term
Almost odourless
Free from toxic substances such as isocyanates, solvents and phthalates
Waterproof and airtight
Good UV resistance

Available packages & colors

	SKU	EAN	Description
	538106000 - 5414195026038 - Tec7 Fast black - cartridge 290ml	538106000	5414195026038	Tec7 Fast black - cartridge 290ml
	538206000 - 5414195026137 - Tec7 Fast white - cartridge 290ml	538206000	5414195026137	Tec7 Fast white - cartridge 290ml

Application

Universally applicable in construction, plumbing and general maintenance.
Safe to use on all materials: mirrors, polystyrene, non-ferrous metals, most plastics… Leaves no marks on natural stone.

Bonding wooden and metal framework to concrete (raised floors)
Gluing slats/structures to floors with underfloor heating; avoid drilling. For example, built-in cupboards
Bonding metal stud floor and ceiling profiles (plasterboard)
Gluing rigid insulation boards to ceilings
Gluing ridge tiles and facade tiles
Installation of PC light panels in sloping roofs
Installation of zinc roof details: gutters, roof trim, overflows, penetrations, skylight flanges, cable ducts for solar panels and air conditioning
Facade and decorative plinths in natural stone
Vertical bonding of light fixtures to facade bricks
Signage: house numbers, pictograms, advertising boards
Skirting boards and mouldings
Wooden planks against MDF or lathwork
Wall panelling, acoustic panels
Waterproofing panels in shower walls: rigid wall panels, PVC panels, acrylic
Door frames, jambs, trims
Window sills in wood, natural stone, composite, HPL
Thresholds, doorsteps, entrance doors
Fittings and skirting boards for custom cabinets, fixing the body to the wall, mounting the top
Splash backs, kitchen back walls against wall
Stair treads, stair nosings
Fixing standing toilets
Mounting cable ducts to walls and ceilings

Technical information

Specifications

(All values at 23°C / 50% relative humidity)

Base: NTec hybrid polymers.
Curing: Polymerisation with (air) moisture.
Odour: neutral.
Density: 1.52 +/- 0.1 g/cm³.
Processing temperature: -10°C to +30°C.
Thermal stability: -40°C to +90°C / peak 200°C (max. 20 minutes).
Skin formation: 3–5 minutes.
Sticky: 6–10 minutes.
Functional strength (hand tight):
- Porous materials: 15 min
- Non-porous materials: 2–3 hours
Curing:
- 24h – 6mm
- 7d – 14 mm
Volume shrinkage after curing: < 1%.
E-modulus 100% (DIN 53504 S2): 200N/cm² / 2.00 MPa.
Elongation at break (DIN 53504 S2): 200%.
Shore A hardness (DIN 53505): 60.
Tensile strength (DIN 53504 S2):
- After 7 days: 270 N/cm² (= 270 kg/10cm²)
- After 3 months: 300 N/cm² (= 300 kg/10 cm²)
Chemical resistance:
- Good: water, seawater, aliphatic solvents, oils, fats, dilute organic acids, alkalis
- Moderate: esters, ketones, aromatic solvents
- Bad: concentrated acids, chlorinated solvents
Weather resistance: very good.
Shelf life: 15 months from production. The first seven digits of the batch number are the production date: YY WW DDD, where YY = year (24 = 2024), WW = week and DDD = day.
Safety precautions: please consult the safety data sheet.

Instructions

Processing temperature between -10°C and +30°C. At temperatures below 0°C, curing will be significantly delayed.
Apply to a clean, stable, dust- and grease-free surface.
Test adhesion on plastics, powder coatings, exotic woods and bituminous materials. Tec7 Fast has no or only limited adhesion to PP, PE, PTFE and silicone. PT7 primer increases the adhesion to plastics and powder coatings.
Reinforce weak and powdery surfaces (plaster, old concrete, wood, etc.) with Poxy Primer.
Tec7 Fast hardens through a reaction with (air) moisture. Use Tec7 Fast in lines, not in thick clumps. Dots will take longer to harden. When used between two airtight materials, it is recommended to dampen one of the surfaces very slightly.
Ideal adhesive thickness: 0.1 mm to 3 mm. On porous surfaces with an adhesive thickness of 0.25 mm, the bonding is load-bearing after approx. 15 minutes, fully cured after 24 hours. With thicker adhesive layers and non-porous substrates, the build-up of force will be delayed.
One way to achieve thin layers of adhesive is to not cut the nozzle at all, or to cut it only very slightly.
Bonding between two non-porous, vapour-resistant substrates prevents the availability of moisture and slows down curing.
Use vertical adhesive strips to avoid moisture and dust accumulation.
Can be painted over after skin formation. Do not use with alkyd-based lacquers and paints.
Use Tec7 Cleaner and/or Tec7 Powerwipes to clean tools and/or remove uncured Tec7. Clean hands and skin with Tec7 Powerwipes.
Cured Tec7 Fast can only be removed by mechanical means. Any residue can be removed with Remove All if the substrate can withstand it.

You have a question?

You can always call or email us.

Strictly necessary cookies

Performance cookies

Marketing cookies