Product description
- Safe on all materials.
- For bonding of all larger surfaces.
- Contains no harmful solvents, isocyanates or phthalates.
- Up to 5 m² of adhesive surface per can.
- High adhesive strength: 15 kg/cm².
ST7-101 SprayTec Large Surfaces
MS POLYMER SPRAY ADHESIVE FOR THIN BONDS
Bond everything
Single sided application
Repositionable
Even on damp surfaces (hand dry)
Buy from your favorite online store
No webshop found
General information
Available packages & colors
| SKU | EAN | Description | ||
|---|---|---|---|---|
|
530001000 - 5414195021842 - ST7-101 SprayTec Large Surfaces - aerosol 750ml | 530001000 | 5414195021842 | ST7-101 SprayTec Large Surfaces - aerosol 750ml |
Application
Bonding of all building materials on large surfaces:
- roof materials (EPDM, PVC, underlayment…)
- floors (linoleum, vinyl and vinyl tiles, LVT, cork, ...)
- walls and partitions (waterproofing membrane, insulation, shower and acoustic panels)
- wood (veneer, HPL, laminating and doubling of panels, etc.)
- insulation materials: (foam rubber, stair coverings, PIR, PUR, EPS, XPS,…)
Technical information
Specifications
All values at 23°C, 50% Relative humidity:
- Base: MS hybrid polymer.
- Curing mechanism: Polymerisation by (air) moisture.
- Colour: white.
- Tack build-up: 10-20 minutes.
- Skin formation: 30 minutes.
- Hand-tight/functional strength: 4 h.
- Curing: 24 h.
- Adhesion strength: 15 kg/cm².
- Processing temperature: between +5°C and +40°C.
- Temperature resistance: from -40°C to +100°C (peak of max. 30 minutes: +150°C).
- Adhesive thickness: 0,2 mm to 1 mm.
- Bonding up to 5 m² per can (0.25 mm thickness).
- Can be painted over with most varnishes and paints. Do not use in combination with alkyd resin paints.
- Shelf life: 18 months from production. The first seven digits of the batch number are the production date: YY WW DDD, where YY = year (19 = 2019), WW = week and DDD = day.
- Safety measures: consult the safety sheet on the website.
(*) Adhesion strength measured as Tensile Lap Shear Strength, depending on the surface and its preparation.
Safety data sheet
Technical data sheet
Application guidelines
Instructions
For detailed instructions for use: see the processing guidelines.
Points of attention:
- ST7-101 SprayTec is suitable for thin bonding on flat surfaces. Irregularities must be less than 1 mm.
- Apply to a dust and grease free surface. The surface should not be completely dry. There should be no visible drops or a layer of water.
- Protect adjacent materials from overspray.
- Test adhesion on plastics, powder coatings, exotic woods and bituminous materials.
- Remove spilled product before curing with Spray & PUR Cleaner or Tec7 Cleaner. Cured SprayTec can only be removed mechanically.
Use
- Shake vigorously at least 20 times. Hold the can upside down while doing this. Shake regularly during use.
- Screw the can onto the Spray & PUR Gun and turn the dosage knob fully open. Fit the SprayTec Nozzle for an even spray pattern. Do a spray test on a test surface.
- Spray from a distance of 30-50 cm. Use several quick passes for an even layer thickness or slow for a bubble effect with more irregular but thicker layer build-up.
- Allow the sprayed layer to evaporate for at least 1 minute before bonding. Immediately after spraying, bonded materials are easy to reposition.
- When using vertically: leave uncovered for 10–20 minutes to allow the initial bond to build.
- Carefully join the materials to be bonded and avoid excessive force during curing. After 4 hours (at 23°C) the glue is hand-tight. Complete curing after 24 hours.
After use
- Unscrew the empty SprayTec can from the gun and rinse the gun thoroughly with Spray & PUR Cleaner.
- Store an opened can mounted on the gun with the set screw closed. This way the product can be reused for 3–4 months.
- SprayTec can be painted over. Due to the variety of varnishes and paints, testing is recommended. The use of alkyd resin-based products can disrupt the drying process of both the adhesive and the paint.
News
