Trans Inox



Reflects the colour of the substrates

Masks thicker cracks

Where to buy?

General information

Product description

  • After curing, super strong and permanently elastic.
  • Free of phthalates, solvents and isocyanates.
  • Safe on mirrors, no markings on natural stone.
  • Almost odourless.
  • Even on wet, slippery surfaces.
  • Fungus and bacteria resistant.
  • Water and airtight.
  • Can be used on most building materials.

Available packages & colors

SKU EAN Description
trans-inox-310ml-en 539706000 - 5414195537060 - Trans Inox - cartridge 310ml 539706000 5414195537060 Trans Inox - cartridge 310ml

Technical information


  • Base: MS polymer.
  • Nature: elastic paste-like.
  • Colour: stainless steel/aluminium with transparent flow.
  • Flow: 5 bar / 3 mm / 23°C 160 g/min.
  • Skin formation: 23°C 50% R.H. 5 minutes.
  • Tack-free: 23°C 50% R.H. 40 minutes.
  • Full hardening: 23°C 50% R.H.
    • 24h - 4 mm
    • 48h - 5 mm
    • 72h - 8 mm.
  • Hardness - DIN 53505: 40 Shore A.
  • Volume shrinkage after curing: < 2%.
  • Tensile strength: 220 N/cm².
  • Tear strength - DIN 53507: ca. 40N/cm².
  • Thermal stability: - -30°C to +95°C - peak: 155°C - max. 30 minutes.
  • Adhesion: excellent on (among other things) tiles, cement, natural stone, wood, concrete, aluminium, with the exception of materials which contain PP, PE, PTFE or bitumen.
  • Elongation at break - DIN 53504: >350%.
  • UV-resistance: over time discolouring can develop due to external influences.
  • Overpaintable: OK with most solvent- and water-based lacquers.
  • Chemical resistance:
    • good: water, seawater, aliphatic solvents, greases, diluted organic acids, lyes, oils.
    • moderate: esters, ketones, aromatics .
    • poor: concentrated acids, chlorinated solvents.
  • Safety measures: Please consult the safety data sheet.


  • Processing temperature from +5°C to +40°C.
  • Apply to clean, dust and grease-free substrate.
  • Use Tec7 Prepare & Finish to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean.
  • Apply with manual or air caulking gun (best with telescopic plunger).
  • Due to the wide variety of different plastic materials and compositions, as well as materials that are prone to stress cracking, preliminary trials are recommended.
  • Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials.
  • Start by strengthening weak and/or porous substrates with Fixprimer.
  • Due to the diversity of varnishes and paints on the market we recommend preliminary tests. Using products based on alkyd resins may delay the drying process.
  • When glueing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
  • Ideal adhesive thickness for optimal adhesion strength: 3 mm.
  • Use in jointing and sealing:

You have a question?

You can always call or email us.

Contact us
screenreader.go to top